JMP is excited to announce our new technical HVAC magazine! It is a great resource to get bite-sized educational pieces similar to the content featured in our seminars. Register to have the latest blog sent to your email address.
By Chris Edmondson
Over the last several weeks we’ve talked about many aspects of designing a commercial sewage lift station, from flow rates to components. In this blog, we’re going to work through a really simple sizing example. Let’s say we are sizing a sewage station for a retirement facility made up of primarily independent living units.
By Chris Edmondson
Just in case you haven’t gotten the message in this series on designing a commercial sewage lift stations, the design process involves a lot more than selecting a sewage pump or sump pump. The most reliable sewage lift
Pumps used in commercial sewage lift stations come in a variety of types (effluents, grinders, etc.) To determine which type is right for your application you must answer two questions:
By Chris Edmondson
In a previous blog we discussed how to determine the flow for a commercial sewage lift station so you determine the necessary pump capacity. Today we are going to discuss Total Dynamic Head, which is also critical to sizing a pump for a sewage lift station. Not only is it absolutely necessary to select a
By Chris Edmondson
Section 712 of the International Plumbing Code (IPC), Section 712, places a burden on the shoulders of engineers. You have to design the sewage pit or basin that collects the sewage and houses the pump(s). To do that properly, you need to address the following questions:
How big should the basin be? According to Section 712.3.2, “The sump pit shall be no less than 18
Visit our Contact Page and let us know what information you'd like to receive.
Powered by Squarespace
