JMP is excited to announce our new technical HVAC magazine! It is a great resource to get bite-sized educational pieces similar to the content featured in our seminars. Register to have the latest blog sent to your email address.
In Part 1 of this series we offered an example of a condenser water pumping system with 800 GPM per condenser for a total of 1600 GPM with the third condenser serving as standby. The tower elevation or lift is 10 feet, the condenser (with the 2-way valve and balance valve) has 20 feet of pressure drop, and the common piping with any safety factor has 30 feet of pressure drop. But there was a problem....
Read MoreApplying a single constant speed pump for each condenser in a chilled water application is a normal design for the HVAC engineer. Some chiller manufacturers suggest piping the pumps with a common header and activating each pump as the condensers are staged on. However, there is a hidden issue with this approach, which, if not addressed may cause major problems....
Read MoreNew York City wasted no time adopting portions of the recently published Standard 188-2015, Legionellosis: Risk Management for Building Water Systems. This is following the recent outbreak of...
Read MoreWhy has ASHRAE decided to address balancing in a standard that is written for the purpose of Legionella prevention? The reason has to do with domestic hot water recirculation systems – particularly large systems with multiple returns coming back to the boiler. If these return lines are not balanced it is possible that...
Read More
Visit our Contact Page and let us know what information you'd like to receive.
Powered by Squarespace
