JMP is excited to announce our new technical HVAC magazine! It is a great resource to get bite-sized educational pieces similar to the content featured in our seminars. Register to have the latest blog sent to your email address.
Has your state adopted ASHRAE 90.1-2010 or beyond into its commercial building code? If so, then it is highly likely that you should be incorporating either waterside or airside economizing into your cooling design. The Standard has effectively made air or waterside economizing a requirement in virtually every…
Read MoreIn our last blog, we determined that we required a 56 PSI pressure boost in our 100 Room Apartment example. Previous to that we determined (using the Hunters Curve) that we had a maximum total demand of 180 gpm. With these two values we are now prepared to select…
Read MoreToday is a big day. We are about to complete our Pressure Booster Selection Procedure worksheet so we can select a pressure booster. But before we do that…
Read MoreToday we are going to talk about fixture counts and introduce you to the Hunters Curve. Going back to the same simple example we used in Part 1 and Part 2 of this series , we know that each apartment in our 100 Room apartment building has one …
Read MoreWhen sizing a pressure booster you should always begin with a simple sketch of the system, including…
Read More
Visit our Contact Page and let us know what information you'd like to receive.
Powered by Squarespace
